SE-500 Solar Battery Maintainer
50% more Power than comparable
panels on the market. Perfect match for medium-sized boats, RVs, trucks and
tractors. Protects against natural battery discharge and electronic drain so no
more worries about empty batteries. Can also be used to charge portable
electronics, deer feeders, gate openers, fence chargers. Easy to use with
a Plug’n’Play® for quick connections, including quick connect to attach multiple
panels together. A push button touch action indicator lets you know that the
panel is working. Engineered to maintain and increase the life of your battery
it comes with multiple wire adaptors to attach the charger to different
connectors. Just expose this weatherproof wonder to daylight – cloud or
sun, outside or behind windows and let the sun charge your battery while you
relax. The ICP Solar Sunsei Solar Charger provides immediate
trickle-charge when exposed to daylight, even on cloudy days. And because
it’s a Sunsei, the SE-500 has many uses. It’s perfect for charging portable
electronics like laptops and cell phones, not to mention gate openers, fence
chargers and deer feeders. Sunsei, delivering clean green power to enhance
living.
Model SE-500 - Engineered to maintain your 12V deep cycle
battery
Power: 500mA, 15V (7.5W)
Touch-action indicator lets you know your
panel is charging
Plug’n’Play® for quick connections, connect multiple panels
in seconds without tools or rewiring
The box includes:
1 solar panel
SE-500
1 cigarette lighter adapter
1 female cigarette lighter adapter
1
battery clamp connector
1 terminal ring connector
1 extension cable
(10')
1 panel-to-panel jumper cable
4 mounting screws
Dimensions: 19.05" x 10.16" x 0.55" / 48.4 cm x 25.8 cm x 1.4 cm
Weight: 3.3 lbs / 1.5
kg
Weatherproof
10 year power warranty
INSTALLATION
PROCEDURE
STEP 1 – TESTING THE PANEL
Press the sun-shaped
button. The LED will light up when the panel receives sufficient daylight to
produce power.
STEP 2 – MOUNTING
Position the solar panel where
you would like it to be permanently installed. Angle the panel in such a way
that it will be perpendicular to the strong midday sun (straight up in most
cases), between 10 a.m. and 2 p.m. Insert each mounting screw and tighten
carefully. Do not over-tighten.
STEP 3 – CONNECTION
Remove the
connector caps before connecting the cables. Connect the solar panel to the
battery using one of the included connection options: the cigarette lighter
adapter, the battery-clamps or the O-rings. For the last two options make sure
to connect the red clamp to the plus pole and the black clamp to the minus-pole
of the battery. If needed use the included 10-foot extension
cable.
NOTE: The installation procedure above is an abstract from
the complete manual (included in the box). Before installing your solar charger
please consult this full paper version.
|
